Get More Information

All articles

How do I assemble my new Rebel bag?Updated 10 months ago

The base of the Rebel is now removable. This allows the bag to be shipped much more efficiently, saving on resources, but also allows you to collapse the Rebel down for travel or easy storage. The base of the bag can be inserted in a few easy steps.

1)   There are 2 sharp and two round corners on the base piece. The sharp corners should sit against the back panel while the round corners will be at the front of the bag.

2)   Inside the base of the Rebel you will see two pieces of liner, one on the left side and one on the right side. Start by sliding the base under the left side liner and slide it in as far as possible.

3)   Next insert the right side by bending up the middle of the base in a similar shape to a bridge.

4)   Once the right side is under the right flap, press down on the middle of the "bridge" and slide the base all the way into the right side. You may need to lift the bag and wiggle the base to get it fully set into all 4 corners.

5)   once set, place the bag on the ground and press down from the top of the base to ensure the base is flat.

6)   you may have twisted the sewn edges of the left/right liner while inserting the base, simply untuck these edges for a completely flat base.

Was this article helpful?